A Using the transmitter display
This section explains how to use the display. Using the display, you can move through the menus, configure
the application, monitor and control the application, and perform maintenance and diagnostic tasks.
A.1 Components of the transmitter display
The transmitter display includes a status LED, a multi-line LCD panel, two security switches, and four optical
switches.
Figure A-1: Model 5700 transmitter display
Status LED
The status LED indicates the current state of the transmitter.
Figure A-2: Model 5700 transmitter status LED
Table A-1: Status LED and device status
Status LED condition Device status
Solid green No alerts are active.
Solid yellow One or more alerts are active with Alert Severity = Out of Specification,
Maintenance Required, or Function Check.
Configuration and Use Manual Using the transmitter display
MMI-20025166 March 2019
Configuration and Use Manual 309
To Next Page
Loading...
