15.4 Battery replacement
The transmitter contains a battery that is used to power the clock when the transmitter is not powered up.
Users cannot service or replace the battery. If the battery requires replacement, contact customer support.
If the battery is non-functional and the transmitter is powered down, then powered up, the clock will restart
from the time of the power-down. All timestamps will be affected. You can correct the issue by resetting the
transmitter clock. For a permanent resolution, the battery must be replaced.
Maintenance Configuration and Use Manual
March 2019 MMI-20025166
230 Micro Motion Model 5700 Transmitters with Configurable Outputs
To Next Page
Loading...
