Figure A-5: Navigation arrows
4. If you make a menu choice that leads to a possible configuration change, or to certain procedures such
as zero calibration:
• If display security is not enabled, the display prompts you to activate ⇦⇧⇩⇨, in that order. This
feature protects against accidental changes to configuration, but does not provide any security.
Figure A-6: Security prompts
• If display security is enabled, the display prompts you to enter the display password.
5. If you make a menu choice that requires entering a numeric value or character string, the display
provides a screen similar to the following:
Figure A-7: Numeric values and character strings
• Activate ⇦ or ⇨ to position the cursor.
• Activate ⇧ and ⇩ to scroll through the values that are valid for that position.
• Repeat until all characters are set.
• Activate and hold ⇨ to save the value.
Using the transmitter display Configuration and Use Manual
March 2019 MMI-20025166
312 Micro Motion Model 5700 Transmitters with Configurable Outputs
To Next Page
Loading...
