DST ON:Mountain GMT-7.0 SM:T075
SN:000000000
kg/s Max kg/s Min kg/s Avg kg/s Std …
8/25/2018 9:58 0.0082359 0 0.00091223 9.76E-05 …
8/25/2018 10:03 0.001018 0.00084441 0.00091756 1.61E-05 …
8/25/2018 10:08 0.00099489 0.00086279 0.00092519 1.44E-05 …
8/25/2018 10:13 0.0010835 0.00080879 0.00093774 2.01E-05 …
8/25/2018 10:18 0.0011767 0.00084206 0.00094224 2.11E-05 …
8/25/2018 10:23 0.0010243 0.00086888 0.00094534 1.85E-05 …
8/25/2018 10:28 0.0010903 0.00084823 0.00094747 1.81E-05 …
8/25/2018 10:33 0.0010319 0.00085327 0.00095123 1.67E-05 …
8/25/2018 10:38 0.0011232 0.00088614 0.00095222 1.59E-05 …
8/25/2018 10:43 0.0010841 0.00081306 0.00095126 1.99E-05 …
8/25/2018 10:48 0.0010999 0.00086106 0.00095333 1.93E-05 …
8/25/2018 10:53 0.0011523 0.00085537 0.00095528 2.01E-05 …
…
Note
The historian log displays only in English.
16.1.2 SMV history and SMV log
The transmitter automatically saves test data for all SMV (Smart Meter Verification) tests. You can generate a
log containing data for the 20 most recent tests or for all SMV tests. The log is an ASCII file in .csv format.
Contents of SMV log
Each record in the SMV log represents an SMV test. Each record contains the following information:
• Date and time of test
• Data collected during the test
• The abort code (15=test completed normally)
• A pass/fail result for the left pickoff (0=Pass, 1=fail)
• A pass/fail result for the right pickoff (0=Pass, 1=fail)
• The sensor type code
• The sensor serial number
SMV history and power-cycles
If the transmitter is rebooted or power-cycled, SMV history is not affected.
SMV history and configuration files
If you restore the factory configuration or upload a configuration file, SMV history is not affected.
Log files, history files, and service files Configuration and Use Manual
March 2019 MMI-20025166
234 Micro Motion Model 5700 Transmitters with Configurable Outputs
To Next Page
Loading...
