• Volume flow rate (l/sec) or GSV flow rate
• Density (g/cm³)
• Line temperature (°C)
• External temperature (if available)
• Pressure (if available)
• If concentration measurement is enabled:
— Standard volume flow rate
— Net mass flow rate
— Net volume flow rate
— Referred density
— Concentration
• If API referral is enabled:
— CTPL or CTL
— Corrected density
— Corrected volume flow rate
• Alert status registers (hexadecimal format)
• Live zero (kg/sec)
• Tube frequency (Hz)
• Drive gain (%)
• Left pickoff (filtered) (V)
• Right pickoff (filtered (V)
• Left pickoff (raw) (V)
• Delta T
• Case temperature (°C)
• Voltage applied to the core processor (V)
• Temperature of the core processor board (°C)
• Temperature of the transmitter electronics (°C)
Historian data and power-cycles
Historian data is maintained across transmitter reboots and power-cycles.
Historian data and configuration files
If you restore the factory configuration or upload a configuration file, existing historian data is not affected.
Historian log, 5-minute average data
S TAG:SUPPLY UID:22729F1F
SW:000000045 800:000000402
MassFlow MassFlow MassFlow MassFlow …
Configuration and Use Manual Log files, history files, and service files
MMI-20025166 March 2019
Configuration and Use Manual 233
To Next Page
Loading...
