EasyManua.ls Logo

Eventide Harmonizer H90 - Mod Delay

Eventide Harmonizer H90
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Factory Presets
DeadSpace
Head Space
Heartbreak Vibe
MultiTape Tap
Old Age Deviant
Shorty Pickin
Warm Slap
Whole Lotta Drive
Wild Echoes
Mod Delay
Modulated delays – great for creating chorus effects and chorused delays.
Mix: wet/dry mixer, 100% is all wet signal.
Delay Mix: Controls the relative level of Delay A and Delay B. Delay Mix’s mixing behavior depends
on whether you’re using mono or stereo outputs.
For mono output:
Delay Mix = 0%, output 1 will have only delay A’s contribution.
Delay Mix = 50%, output 1 has an equal amount of delay A and delay B.
Delay Mix = 100%, output 1 will have only delay B’s contribution.
For stereo output:
Delay Mix = 0%, both outputs will have only delay A’s contribution.
Delay Mix = 50%, delay A goes to output 1 only and delay B goes to output 2 only.
Delay Mix = 100%, both outputs will have only Delay B’s contribution.
Delay A: Sets delay time from 0 to 3000 ms (milliseconds). With Tempo Sync OFF, delay is
displayed in ms. With Tempo Sync ON, delay can be sync’d to the tempo and is displayed as a
rhythmic sub-division of the tempo beat value from No Delay to a whole note in common note
increments.
Delay B: Same as A.
Feedback A: Controls level of Feedback A, the number of repeats.
Feedback B: Same as A.
11. ALGORITHM GUIDE
139

Table of Contents

Related product manuals