Eventide Harmonizer H90 - TremoloVerb

Decay: Arbitrary 0-100 decay (less decay will also take away reverb attack).
Size: Size of the reverb.
Delay: Post reverb and pre pitch-shift delay time in milliseconds or note-based with Tempo Sync on.
Low Band Decay: Amount of post reverb and pitch-shifter low band signal (this is in the feedback
path).
High Band Decay: Amount of post reverb and pitch-shifter high band signal (this is in the feedback
path).
Pitch Shift A: Pitch-shifter A’s pitch in cents
500c = P4th
700c = P5th
1200c = 1 Octave
1900c = 1 Octave+P5
2400 = 2 Octaves
Pitch Shift B: See description for Pitch Shift A
Pitch Decay: The Pitch Decay knob controls the amount of pitch shifting in the reverb tail. It
increases from 0 to 100. Beyond 100 are two Freeze modes. Pitch Freeze locks out the pitch
shifters, but feeds the reverb, allowing you to freeze the Shimmer pitch climb at opportune times.
Pitch+verb Freeze freezes everything (pitch and reverb) for dry soloing on top of the frozen reverb.
Mid Band Decay: Amount of post reverb and pitch-shifter mid band signal (this is in the feedback
path).
Factory Presets
Amedeo-Bass-Shim
Dark Angels
Demon Call
Gunshot Snare
Hells Gate
Ironworx
Mountains
Neros Ascent
Quasar
Shimmer
Size Matters
Sneaky Verb
Touched By An H9
TremoloVerb
TremoloVerb is a celestially large reverb cut back down to Earth size by an aggressive tremolo. Use the
Sine, Triangle, Peak, Ramp, or Square waves to create a rhythmic ambience; Random and Sample/Hold to
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
235