Eventide Harmonizer H90 - 6.2.1. Insert Routing

Pressing the P, A, or B LED Buttons will toggle active/bypass for the Program, Preset A, or Preset B.
 Tip
When using Insert or Dual routing, press Quick Knob 1 to swap Presets A and B.
6.2.1. Insert Routing
The Insert Routing configuration allows Routing Mode to enable either two mono Inserts or one stereo
Insert, which can be placed at any point along the signal path or turned off.
Insert Routing Options
Series Parallel
Pre A Pre A & B
Parallel Pre A
Mid Pre B
Post B Parallel
Post A
Post B
Post A & B
To enable an Insert:
Quick Knob 1: Turn to change the routing between series and parallel.•
50
6. EDIT MODES