1.. And 2
Ambient Delay
AnothrBrick1
Big Nice Day
Big Warm Digital
Bridge Of Sighs
ChorusyTrem
ComfNumbVerse
Copy Cat
DDLY
Dual Big Warm Digital
EVPREMIX
Filtered Digital
Flaser
LastFewBricks1
Pristine Digital Delay
RunRunRun
Storm Brewing1
Storm Brewing2
Trem Delays
TwinDelay
What I’m Looking For
Ducked Delay
The delay levels are dynamically lowered while you’re playing and restored to their normal levels when
you stop playing.
Mix: wet/dry mixer, 100% is all wet signal.
Delay Mix: Controls the relative level of Delay A and Delay B. Delay Mix’s mixing behavior depends
on whether you’re using mono or stereo outputs.
For mono output:
Delay Mix = 0%, output 1 will have only delay A’s contribution.
Delay Mix = 50%, output 1 has an equal amount of delay A and delay B.
Delay Mix = 100%, output 1 will have only delay B’s contribution.
For stereo output:
Delay Mix = 0%, both outputs will have only delay A’s contribution.
Delay Mix = 50%, delay A goes to output 1 only and delay B goes to output 2 only.
Delay Mix = 100%, both outputs will have only Delay B’s contribution.
Delay A: Sets delay time for Delay A output from 0 to 3000 ms (milliseconds). With Tempo Sync
OFF, delay is displayed in ms. With Tempo Sync ON, delay can be sync’d to the tempo and is
displayed as a rhythmic sub-division of the tempo beat value - changing this from 0 to a whole note
in common note increments.
Delay B: Same as A.
Feedback A: Controls level of Feedback A, the number of repeats.
Feedback B: Same as A.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
To Next Page
Loading...
