Factory Presets
Adapt-A-Room
Ames Duck
DynaVerb
Phil Mcavity
Radio Static
Tap-n-Trem
Hall
Hall simulates the sound of large enclosed spaces. Hall offers flexible control of a 3-band crossover
reverb network. There are independent decay controls for the low and high band, as well as independent
level controls for low, mid, and high band. This is the go-to Algorithm for beautiful realistic spaces or for
reverb sounds just beyond the boundary of realism.
Mix: Determines the relative level of the wet and dry signals.
Decay: Master decay in seconds or note-based with Tempo Sync ON.
Size: Hall size.
Pre Delay: pre-delay in milliseconds or note-based with Tempo Sync ON.
Low Band Reverb Level: boost/cut of LOW reverb with cut-off at 300 Hz, -100 effectively cuts all of
the low band reverb.
High Band Reverb Level: boost/cut of HIGH reverb with cut-off at 1500 Hz, -100 effectively cuts all
of the high band reverb.
Low Band Decay: Decay of low band reverb, scales the Decay time.
High Band Decay: Decay of high band reverb, scales the Decay time.
Modulation Level: Increases random modulation of reverb tails.
Mid Band Reverb Level: Boost/cut of mid reverb (between 300 and 1500 Hz), -100 effectively cuts
all of the mid band reverb.
Factory Presets
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
To Next Page
Loading...
