Eventide Harmonizer H90 - 5.2.1.1. Assign to Footswitches

Fig. 5.5 Page two of the performance parameter mappings
5.2.1.1. Assign to Footswitches
Press the P, A, or B LED Button to cycle through a List of the P, A, or B Footswitch available performance
parameters. The available performance parameters will vary depending on what Presets are currently
loaded, there are choices like momentary states denoted by the (M), or a HotSwitch, or the performance
functions of the algorithm.
Each Footswitch’s LED will change color depending on what parameter is assigned. Note that the colors
play a role in these assignments:
A White LED indicates active states, or even Insert active states.
An Aqua color indicates a HotSwitch.
Blue indicates a delay parameter, such as Tap Tempo, repeat or feedback oscillation.
Red indicates a pitch shifting parameter, such as the Flex parameter for PitchFlex.
Green indicates a modulation parameter, such as an LFO Brake/Speed or Retrigger.
Performance Parameter Assignment Options
P Footswitch A Footswitch B Footswitch
Program Active/
Bypass
Preset A Active/Bypass Preset B Active/Bypass
Program Active/
Bypass (M)
Preset A Active/Bypass (M) Preset B Active/Bypass (M)
Ins 1 Active/Bypass HS2 On/Off HS3 On/Off
Ins 2 Active/Bypass HS2 On/Off (M) HS3 On/Off (M)
HS1 On/Off Preset A Tap Tempo Preset B Tap Tempo
HS1 On/Off (M)
Preset A Algorithm Specific
Parameters
Preset B Algorithm Specific
Parameters
•
•
•
•
•
42
5. PLAY MODES