SAW
RAMP
NOISE
Delay Mode: (Lofi/Modern) Two different options for delay sounds. LoFi emulates an early bucket
brigade pedal that was limited to a delay time of 300 ms. Modern will be a little brighter/cleaner
sounding and the self-oscillation will be a little more uniform.
Jump Interval: Controls the ratio used to jump the delay time when using the PitchJump
performance parameter. (m3, M3, P4, P5, Oct.)
Stereo Tap Division: When stereo outputs are connected, a second tap out of the BBD emulation is
connected to the second channel. This controls the point at which this second delay is tapped out of
the BBD.
Performance Parameters
Self Osc: A momentary or latching performance parameter that causes the BBD emulation to self-oscillate.
Pitch Jump: A momentary or latching performance parameter that instantaneously scales the delay time
(clock frequency) of the BBD emulation by the ratio determined by the Jump Interval parameter. This
causes a momentary pitch shift of any sound being fed back through the BBD emulation.
Retrigger: Retriggers the modulation LFO to the beginning of the cycle. Useful for re-syncing during
playback, or creative effects.
Factory Presets
Allium
Flower Power
Gimme Some Reggae
LeakyBucket
Nice Slap
Rosebud
Unintended
Digital Delay
Twin 3 second delays with independent delay time and feedback controls.
Mix: wet/dry mixer, 100% is all wet signal.
Delay Mix: Controls the relative level of Delay A and Delay B. Delay Mix’s mixing behavior depends
on whether you’re using mono or stereo outputs.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
To Next Page
Loading...
