Eventide Harmonizer H90 - Vibrato

ADSR: The modulation becomes driven by an ADSR triggered by the amplitude of the audio
input.
Manual: When selected, the Manual Mod parameter will control the modulation.
Performance Parameters
Retrigger: Retriggers the primary and secondary modulation LFOs to the beginning of their cycles. Useful
for re-syncing during playback, or creative effects.
Speed / Brake: The Brake engages while this switch is pressed. Short-press to toggle between Fast and
Slow. Long-press to engage Brake.
Fast / Slow: Press to toggle between Fast and Slow, which slows the primary and secondary LFOs by a
predetermined factor. The Brake does not engage while this switch is pressed.
Brake (M): Slows the LFOs at a constant rate and pauses the LFOs until the switch is released.
Factory Presets
Chopdulator
Cloud Pulse
Dreamdulator
DreamyDreamulator
DreamyDreamulator2
Haze Cutter
Lonesome Trail
Never There
Quadruple Peaks
Time Lapse
Tremdulator
Vibrato
Vibrato is an effect that simulates the pitch change you get by modulating a guitar string or using a
whammy bar. Modulating the rate with an Expression Pedal or envelope will create some incredible
vibratos. Three types of vibrato are offered – Modern, Vintage, and Retro.
Intensity: Effect level.
Type
Modern
Vintage
Retro
Modulation Depth: Sets the modulation sweep range from narrow to wide.
Speed / Sensitivity: Sets the modulation sweep rate. Speed becomes Sensitivity when Shape is set
to Envelope or ADSR.
Modulation Waveform Shape: Selects the waveform, or source, of the modulation. The choices are:
Sine
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
194
11. ALGORITHM GUIDE