Triangle
Peak
Random
Square
Ramp
SampHold
Envelope: The modulation becomes driven by the amplitude of the audio input.
ADSR: The modulation becomes driven by an ADSR triggered by the amplitude of the audio
input.
Manual: When selected, the Manual Mod parameter will control the modulation.
Unused/Stereo Width/Filter Stages: For Modern and Vintage controls the width of stereo panning
(stereo mode only). For Retro selects the number of filter stages.
Depth Mod: Controls the amount of modulation of the Depth parameter. Analogous to AM
(Amplitude Modulation).
Speed Mod: Controls the amount of modulation of the Speed parameter. Analogous to FM
(Frequency Modulation).
Mod Rate / Mod Sens: Sets the secondary LFO rate – determines how fast the Depth Mod and
Speed Mod “wiggle” their targets. Ranges from 1/8th to 8x the Speed value. Mod Rate becomes
Mod Sens when Mod Source is set to Envelope or ADSR.
Mod Source: Selects the secondary LFO waveform, or source. The choices are:
Sine
Triangle
Peak
Random
Square
Ramp
SampHold
Envelope: The modulation becomes driven by the amplitude of the audio input.
ADSR: The modulation becomes driven by an ADSR triggered by the amplitude of the audio
input.
Manual: When selected, the Manual Mod parameter will control the modulation.
Performance Parameters
Retrigger: Retriggers the primary and secondary modulation LFOs to the beginning of their cycles. Useful
for re-syncing during playback, or creative effects.
Speed / Brake: The Brake engages while this switch is pressed. Short-press to toggle between Fast and
Slow. Long-press to engage Brake.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE