Eventide Harmonizer H90 - Plate

High Band Shelving Level: Post reverb shelving boost/cut of high frequencies with cutoff at 2000
Hz.
Echo Feedback: Feedback amount around the post reverb echo.
Modulation Rate: The modulation rate from 0 to 100.
Modulation Type and Depth: Select modulation type and depth:
Swept Verb
Flanger Mix
Chorus Mix
Echo Tone: Tone control in the feedback loop of the echoes.
Factory Presets
Ambience
Ekospace-God
Flange Tiles
JungleAppetite
Matrix Decay
ModEchoVerb
Planetarium1
SolarDelay
Plate
Plate simulates the sound of early analog-mechanical reverbs. This Algorithm allows for long reverb times
that won’t take over your sound. Be sure to play with the Low Damp and High Damp knobs to explore the
full palette of tonal variations.
Mix: Determines the relative level of the wet and dry signals.
Decay: Decay in seconds or note-based with Tempo Sync ON.
Size: Plate size.
Pre Delay: Pre delay in milliseconds or note-based with Tempo Sync ON.
Low Damp: Sets the damping frequency for the low end.
High Damp: Sets the damping frequency for the high end.
Distance: Sets room/transducer distance from source/plate driver.
Diffusion: Adjusts diffusion amount which affects reverb build up and tail density.
Mod Level: Mixes in random modulation in reverb tail.
Tone: A pre-reverberator tone control, -100 to 0 is darker, 0 to 100 is brighter.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
229