The following parameter apply to each voice:
Level: Level of each oscillator. 0 to 100.
Shift: The shift amount of the oscillator voice given in musical intervals. -Oct, -M7, -m7, -M6, -m6, -
P5, -Tri, -P4, -M3, -m3, -M2, -m2, Uni, m2, M2, m3, M3, P4, Tri, P5, m6, M6, m7, M7, Oct
Shape: The waveform for the oscillators:
Saw
Square
Triangle
Narrow Pulse
Wide Pulse
Performance Parameters
Freeze: Performance parameter which freezes the current synth sound.
LFO Retrig: Momentary performance parameter which retriggers the LFO.
Synthonizer
Synthonizer tracks the pitch of the note that you’re playing and generates a synthesized tone at the same
pitch. Voice A is an additive synthesizer useful for creating organ or Theremin-style sounds; Voice B is a
subtractive synthesizer for creating classic analog-style synth sounds.
Mix: Wet/dry mixer, 100% is all wet signal.
Vox Mix: Controls the ratio of the two synthesized voices A and B.
Wave Mix A: Controls the mix of the various added waveforms to control the tone and perceived
pitch of voice A.
Octave B: Controls the blend between unison, 1 octave down, and 1 octave up synth voices to
control the tone and perceived pitch of voice B.
Attack A: Controls the attack time for synthesized voice A.
Attack B: Controls the attack time for the filter on synthesized voice B.
Verb Level: Sets the reverb level.
Verb Decay: Sets the reverb decay time.
Shape A: Selects voice A waveshape:
Sine
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
To Next Page
Loading...
