PWM
Detune
LFO Amount: Controls the amount of modulation the LFO applies. -100 to 100.
LFO Rate: Sets the speed of the LFO. 0.01 to 20.0 Hz or Tempo Based.
LFO Shape: Sets the shape of the LFO:
Sine
Triangle
Square
Peak
Ramp Up
Ramp Down
Random
Sample & Hold
Detune: Controls the detuning of all three voices. Adds a variable amount to each such that
modulation is still heard even with two voices. -100 to 100.
Spread: Pans Voice 1 and Voice 3 to opposite sides while keeping Voice 2 in the middle. -100 to
100.
Freeze Release: Determines the release time after a sound is un-frozen. NOTE: It is intended that
no new notes are played during a freeze release, but as they say - all rules are made to be broken.
Pitch Wheel: A parameter designed to be mapped to an external controller (MIDI, Exp Pedal, etc).
Mimics a pitch wheel on an actual keyboard and modulates the pitch +/- 1200c.
Playstyle: Tunes the algorithm to either monophonic or polyphonic playing (or somewhere in
between). Monophonic will result in the purest synth tones, Polyphonic will result in better
tracking.
Tip
In addition to adjusting the Playstyle parameter, tracking is generally improved when
using the neck pickup.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
To Next Page
Loading...
