create a convulsing cloud; Envelope or ADSR to control the reverb with your playing; or the Expression
Pedal to control it with your foot.
Mix: Wet/dry mixer, 100% is all wet signal.
Decay: Decay in seconds or note-based with Tempo Sync ON.
Size: Room size of reverb.
Pre Delay: Pre-delay time in milliseconds or note-based with Tempo Sync ON.
Low Band Shelving Level: Post reverb shelving boost/cut of low frequencies with cutoff at 350 Hz.
High Band Shelving Level: Post reverb shelving boost/cut of high frequencies with cutoff at High
Freq.
Tremolo Shape: Selects the waveform, or source, of the modulation. The choices are:
Sine
Triangle
Peak
Random
Square
Ramp
SampHold
Envelope: The modulation becomes driven by the amplitude of the audio input.
ADSR: The modulation becomes driven by an ADSR triggered by the amplitude of the audio
input.
Manual: When selected, the Manual Mod parameter will control the modulation.
Tremolo Speed: Tremolo speed in Hz, sensitivity, or note-based with Tempo Sync on.
Tremolo Depth/Mono or Stereo: Tremolo depth, in stereo mode you have the option to have mono
depth (same on both channels) or stereo depth (tremolo is 90 degrees out of phase).
High Band Cutoff Frequency: The high corner frequency of High-level. Affects the sound unless
High-level is set to 0.
Performance Parameters
Retrigger: Retriggers the LFO to the beginning of the cycle. Useful for re-syncing during playback, or
creative effects.
Factory Presets
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
To Next Page
Loading...
