Feedback: Repeats of a length-valued delay that is fed back around the entire multi-tap machine.
Tone: A tone control.
Positive values for brighter sounding taps.
Negative values for darker sounding taps.
Slurm: Juicy tap slurring/smearing and modulation.
Chop: A pre-tap-machine “chopping’ tremolo OR auto-volume processor. The tremolo has several
LFO waveform choices:
Off
Triangle
Sawtooth
Ramp
Square
SampHold: A randomized Sample and Hold.
Manual: External control of the pre-tap-machine volume. When selected, the Manual Chop
parameter will control the Chop parameter.
Swell: Auto-volume processor for volume swells (0-9 input sensitivity control).
Trigger: A gating effect that chops off the end of sounds (0-9 input sensitivity control).
Speed, Rise, or Release: This knob acts as a multi-function parameter control for the Chop knob.
For the LFO waveforms, Speed will change the LFO speed.
For Swell, Rise will adjust the swell rise time.
For Trigger, Release sets the amount of time after triggering before the gate kicks in and chokes
off the sound.
Width: Adjust how the taps are evenly distributed in the stereo field. 0 will result in the no
distribution, while positive values will increasingly distribute the taps more, and negative values
will reverse this image.
Performance Parameters
Retrigger: Retriggers the modulation LFO to the beginning of the cycle. Useful for re-syncing during
playback, or creative effects.
Factory Presets
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
To Next Page
Loading...
