Mod Rate / Mod Sens: Sets the secondary LFO rate – determines how fast the Depth Mod and
Speed Mod “wiggle” their targets. Ranges from 1/8th to 8x the Speed value. Mod Rate becomes
Mod Sens when Mod Source is set to Envelope or ADSR.
Mod Source: Selects the secondary LFO waveform, or source. The choices are:
Sine
Triangle
Peak
Random
Square
Ramp
SampHold
Envelope: The modulation becomes driven by the amplitude of the audio input.
ADSR: The modulation becomes driven by an ADSR triggered by the amplitude of the audio
input.
Manual: When selected, the Manual Mod parameter will control the modulation.
Performance Parameters
Retrigger: Retriggers the primary and secondary modulation LFOs to the beginning of their cycles. Useful
for re-syncing during playback, or creative effects.
Speed / Brake: The Brake engages while this switch is pressed. Short-press to toggle between Fast and
Slow. Long-press to engage Brake.
Fast / Slow: Press to toggle between Fast and Slow, which slows the primary and secondary LFOs by a
predetermined factor. The Brake does not engage while this switch is pressed.
Brake (M): Slows the LFOs at a constant rate and pauses the LFOs until the switch is released.
Factory Presets
70s Guitar Chorus
Big Clone
Chorus Bumps
Liquid Sweetener
PhasyChorus
Polymodelicious
Pulsating
Spinning
Warmth
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
To Next Page
Loading...
