Eventide Harmonizer H90 - Page 182

Speed Mod: Controls the amount of modulation of the Speed parameter. Analogous to FM
(Frequency Modulation).
Mod Rate / Mod Sens: Sets the secondary LFO rate – determines how fast the Depth Mod and
Speed Mod “wiggle” their targets. Ranges from 1/8th to 8x the Speed value. Mod Rate becomes
Mod Sens when Mod Source is set to Envelope or ADSR.
Mod Source: Selects the secondary LFO waveform, or source. The choices are:
Sine
Triangle
Peak
Random
Square
Ramp
SampHold
Envelope: The modulation becomes driven by the amplitude of the audio input.
ADSR: The modulation becomes driven by an ADSR triggered by the amplitude of the audio
input.
Manual: When selected, the Manual Mod parameter will control the modulation.
Performance Parameters
Retrigger: Retriggers the primary and secondary modulation LFOs to the beginning of their cycles. Useful
for re-syncing during playback, or creative effects.
Speed / Brake: The Brake engages while this switch is pressed. Short-press to toggle between Fast and
Slow. Long-press to engage Brake.
Fast / Slow: Press to toggle between Fast and Slow, which slows the primary and secondary LFOs by a
predetermined factor. The Brake does not engage while this switch is pressed.
Brake (M): Slows the LFOs at a constant rate and pauses the LFOs until the switch is released.
Factory Presets
Auto Wah
BigModdedPlanetSweep
High Quack
LazyPhasyWah
LessEvenAutoWah
Low Quack
Mumbler
Nervous Wah
OttaWah
PhasyWah
SlowSweepWithTreats
SoftChopper
SquareModWah
Talking Back
Talking Bass
VibraPhasyWah
Vintage Wah
Wah-Bravibe
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
182
11. ALGORITHM GUIDE