Rhythm B: See the description for Rhythm A.
Dynamics (Attack/Release Time): Sets attack and release time for the dynamics of the Rhythm and
Effects. When set to minimum (-10), the audio takes the entire step length to fade in; at mid-range
(0), the audio is present for the entire step duration; and at maximum (10), the audio is present for
only 1/10th of the step’s duration. Note: This control has no effect when both Rhythm and Effect
knobs are set to Off.
Step Length: With Tempo Sync OFF, sets the length of each of the 16 steps in ms. With Tempo Sync
ON, sets the length of each step relative to the tap tempo (length of note e.g. whole, quarter, etc.).
Effect A: HarPeggiator lets you apply a sequence of filter, fuzz and/or glitch effects to each note of
the 16-step sequence. The effect sequences are a set of 25 selectable presets. The effects are
indicated by effect type:
Filter 1-5
Fuzz 1-5
Glitch 1-5
All
There are five filter effects, five fuzz effects and five glitch effects to choose from. Or, you can
select one of four different types of random effect sequences:
Random Filters
Random Fuzz
Random Glitches
Random All - a combination of filters, fuzz, and glitches.
Off
Effect B: See the description for Effect A.
Performance Parameters
RESTART: Restarts the sequence from the beginning.
Factory Presets
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
11. ALGORITHM GUIDE
To Next Page
Loading...
