Expert Electronics MB1

To Next Page

To Previous Page

MB1 User Manual

MAIN SCREEN DESCRIPTION

ANF - Automatic Notch Filter button.

Press the ANF button to enable automatic reduction of the narrowband noises in the filter

bandwidth (noises, carriers, CW signals etc.).

Note:

(

If there are no interference, ANF could slightly affect the reception quality of the desired

signal. Disable ANF , if you don't need it.

DSE - Digital Surround Effect in CW mode.

Press the DSE button to enable Digital Surround Effect (more details in DSP functions ).

APF - Analog Pick Filter button. Analog peak-filter creates the triangle filter's AFC (amplitude-

frequency characteristic) in the filter bandpass.

Press the APF button to enable Analog Pick Filter (more details in DSP functions ).

NB1 - First Noise Blanker button.

Press the NB1 button to enable the first Noise Blanker (more details in DSP functions ).

NB2 - Second Noise Blanker button.

Press the NB2 button to enable the second Noise Blanker (more details in DSP functions ).

Note:

(

The NB1 and NB2 algorithms are different. Try each of them to reach the best impulse

interference reduction.

(

NB1 and NB2 Noise Blankers can also be used simultaneously.

5.2.6 PA SETTINGS

Note:

(

Will be available in the new software releases.

164

Expert Electronics MB1 - Pa Settings