EasyManua.ls Logo

Extra 300LX - Page 55

Extra 300LX
515 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 5
PAGE 17
PAGE DATE: 14. August 2015
MAINTENANCE MANUAL EXTRA 330LX
Inspector:
Mechanic:
Date:
Serial No.:
Inspections
as specified
each 50 hours
each 100 hours
O
1
O 37 Inspect all interior exhaust areas for blockage, restrictions,
dents or protrusions into the exhaust flow path.
O
1
O 38 Inspect muffler, heat exchanger for general condition.
O
1
O 39 Inspect exhaust stack to flange interface for cracks in welds
or weld heat affected area, blown out or missing gaskets.
O
1
O 40 Inspect all exhaust welds and area adjacent to the weld for
cracks or weld separation.
O
1
O 41 Inspect bent exhaust areas and turns for erosion, thinning,
bulging or burn through.
O
1
O 42 Inspect surrounding exhaust structures for heat damage or
burning.
O 43 Inspect engine crankcase for cracks, leaks, and security of
seam bolts.
O O 44 Check engine mounted accessories such as pumps, tem-
perature and pressure sensing units for leaks, secure mount-
ing and tight connections.
O O 45 Inspect engine mount for cracks and loose mountings.
O O 46 Inspect engine baffles for cracks and fraying.
O 47 Inspect all wiring connected to the engine or accessories
O O 48 Inspect engine shock mount for deterioration (replace as
required).
O 49 Inspect firewall seals.
O 50 Inspect alternator, cable connections and accessories.
O 51 Inspect condition and tension of alternator drive belt
O 52 Inspect security of alternator mounting
O 53 Inspect starter and starter drive
O O 54 Clean engine if necessary.
O O 55 Lubricate all controls per lubrication chart.
SCHEDULED MAINTENANCE CHECKS
Maintenance Checks Schedule
1 at engine replacement

Table of Contents

Related product manuals