3. Click Recall Preset (see figure 66,
B
on page 100). A confirmation dialog box
opens.
4. Click Recall to recall the preset and immediately apply it to all of the streams
(archive/recording and confidence/preview) or click Cancel to discard the change and
use the previously selected layout.
5. If desired, click the Launch Player button at the top of the Encoding & Layout
page to open a stand-alone preview stream window.
NOTE: In order to preserve the aspect ratios of the windows, layouts may have slightly
different spacing at lower resolution. The spacing can be changed by changing the
layout manually (see Configure and save layout presets on page103)
SMP351 • Web-Based User Interface 102
To Next Page
Loading...
