Reference
Information
This section provides information about:
• Mounting the SMP351
• Supported File Types, Drive Formats, Browsers, and Browser Plugins
• DataViewer
• Glossary
Mounting the SMP351
The 1U high, full rack width, 11.5 inch deep SMP351 Streaming Media Decoder can be:
• Set on a table,
• Mounted on a rack shelf,
• Mounted under a desk or tabletop, or
• Mounted on a projector bracket.
See the SMP351 product page at www.extron.com for compatible mounting kits.
Tabletop Use
The SMP351 includes rubber feet (not installed). For tabletop use, attach a self-adhesive
rubber foot to each corner on the bottom of the unit.
Furniture Mounting
Furniture mount the SMP351 using an optional under-desk or through-desk mounting kit.
Follow the instructions included with the mounting kit.
Table or Wall Mounting
Extron table or wall mounting brackets extend approximately 1/4 inch (6.4 mm) above
the top surface of the SMP351 enclosure. This design allows an air space between the
mounting surface and the enclosure. Follow the instructions included with the mounting kit.
SMP351 • Reference Information 183
To Next Page
Loading...
Need help?
General
