Extron electronics SMP 351 User Manual

Command and Response Tables (continued)
Command
Function
SIS Command
(Host to Device)
Response
(Device to Host)
Additional Description
Set unit name
E X1@
CN
}
Ipn
X1@ ]
Set unit name to
default
E
• CN
}
Ipn
X10) ]
View unit name
E
CN
} X1@ ]
View Telnet
connections
E
CC
}
n
]
Iccn
]
n=number of active IP
connections. Verbose
mode3 returns Iccn
Set verbose mode
E X2@
CV
}
Vrb
X2@]
View verbose
mode
E
CV
} X2@]
System Commands
Backup/Restore
Save configuration
E
1*
X1)
XF
}
Cfg1*
X1) ] Save configuration to file
location (/nortxe-backup).
Restore
configuration
E
0*
X1)
XF
}
Cfg0*
X1) ] Load configuration from file
location (/nortxe-backup).
Resets
Reboot system
E
1BOOT
}
Boot1
]
Complete system reboot.
Restart the
network
E
2BOOT
}
Boot2
]
Reset flash
E
ZFFF
}
Zpf
]
Reset flash memory
(excludes recording files).
System Reset
(factory defaults)
E
ZXXX
}
Zpx
]
Resets device to default and
deletes recorded files.
Reset all device
settings and delete
recording files
E
ZY
}
Zpy
]
Reset to default except IP
address, delete all user and
recorded files
NOTE: This reset excludes IP settings such as IP address, subnet mask, gateway IP address, unit name, DHCP setting and port
mapping (Telnet/Web/direct access) in order to preserve communication with the device.
Absolute reset
E
ZQQQ
}
Zpq
]
Same as System Reset, plus
returns the IP address and
subnet mask to defaults.
Front panel lock (executive mode)
Set Executive
mode
X5!
X Exe
X5!]
View Executive
mode
X
X5!]
NOTES: X1) = Configuration type 0 = IP config (ip.cfg)
2 = Box specific parameters (box.cfg)
X1@ = Unit name Unit name is a text string of up to 63 characters drawn from the alphabet (A-Z), digits (0-9),
and the minus sign/hyphen (-). The first character must be an alpha character. The last
character must not be a minus.
X2@ = Verbose/Response mode 0=clear/none (default for Telnet connections)
1=verbose mode (default for USB and RS-232 host control)
2=tagged responses for queries
3=verbose mode and tagged responses for queries
NOTE: If tagged responses is enabled, all read commands return
the data, the same as setting the value does
(Example: command:
E CV} Response: Vrb3 ])
X5! = Executive mode 0=Off
1=complete lockout (no front panel control)
2=menu lockout
3=Allow recording controls only
X10) = Default name Combination of model name and last three pairs of MAC address
(Example: SMP-351-07-8C-EC)
165SMP351 • Remote Communication and Control

Extron electronics SMP 351 Specifications

General

Brand	Extron electronics
Model	SMP 351
Category	Processor
Language	English