5. Select an information category from the Information 1 drop-down list.
Figure 52. Universal OSD Information Selection
As an example, if File destination is selected, the OSD text might be Front USB
or Internal Drive Only, depending on the current system settings.
The categories are identical to those used in the SIS information commands (such as
1i, 2i, 3i, and so forth). For reference, see the Command and Response Tables on
page164.
6. If desired, select an information category from the Information 2 drop-down list and
select another category from the Information 3 drop-down list.
Changes are saved automatically and applied shortly after being selected. The universal
OSD text appears on-screen in this format:
Display Text, Information 1, Information 2, Information 3. Figure 53 has
examples of how the configuration settings (on the left) translate to the universal OSD
(on the right).
REC1, 56%
00:10:33,20:10:51
OSD, SMP 351,1*4,up*100*full
Figure 53. Universal OSD Information Selection
SMP351 • Web-Based User Interface 81
To Next Page
Loading...
