UMG70XV3-4EN 12.01.2009 123
13 Storing and Output of Measured Values
13.2.5 Data Format
The header will be transmitted at the beginning of the measurement. The first four lines
contain general information about the flowmeter and the measurement. The following
lines contain the configuration parameters output for each channel in a data block.
The line \DATA will be transmitted next, followed once by the column titles (see Table
13.1) for the corresponding channel. The measured values will be transmitted after-
wards.
example: \DEVICE :G70X-XXXXXXXX
\MODE :ONLINE
\CHAN :1 (A:)
DATE :09.01.2008
TIME :19:56:52
Par.Record
Meas. Point No. :A:F5050
Pipe
Outer Diameter :60.3 mm
Wall Thickness :5.5 mm
Roughness :0.1 mm
Pipe Material :Carbon Steel
Lining :NO LINING
Medium :natural gas
Medium Temperature :38 C
Medium pressure :60.00 bar
Transducer Type :xxx
Sound Path :3 NUM
Transducer Distance :-15.6 mm
Damping :20 s
Full-Scale Val. :4.50 m3/h
Physic. Quant. :volume flow
Unit of Measurement :[m3/h]/[m3]
example: \DATA
A:;\*MEASURE; Q_POS; Q_NEG;
B:;\*MEASURE; Q_POS; Q_NEG;
To Next Page
Loading...
Need help?
General
