UMG70XV3-4EN 12.01.2009 117
13 Storing and Output of Measured Values
13 Storing and Output of Measured Values
Storing
The following data can be stored:
•date
•time
• measuring point number
• pipe parameters
• medium parameters
• transducer parameters
• sound path (reflection or diagonal)
• transducer distance
• damping factor
• storage rate
• physical quantity
• unit of measurement
• measured values
• totalizer values
The data memory has to be activated for storing of measured data (see section 13.1.1).
The available data memory can be displayed (see section 13.5).
The storing of each measured value will be signalized acoustically. This signal can be
deactivated (see section 13.4.6).
Online Output
The measured values will be transmitted directly during the measurement to a PC (see
section 13.2.3).
Offline Output
The measured values will be stored in the flowmeter and later transmitted to a PC (see
section 13.2.4).
To Next Page
Loading...
Need help?
General
