UMG70XV3-4EN 12.01.2009 191
A Technical Data
Lamb Wave Transducers (for ATEX Zone 1)
technical type GRH1N33 GRK1N33 GRG1N33
order code GLH-NA1TS GLK-NA1TS GLG-NA1TS
transducer frequency MHz 0.3 0.5 0.2
medium pressure
1
min. extended bar metal pipe: 10 metal pipe:
10 (> DN 120)
5 (< DN 120)
metal pipe: 10
min. bar metal pipe: 15
plastic pipe: 1
metal pipe:
15 (> DN 120)
10 (< DN 120)
plastic pipe: 1
metal pipe: 15
plastic pipe: 1
outer pipe diameter
2
min. extended mm 120 60 190
min. recommended mm 140 80 220
max. recommended mm 600 300 900
max. extended mm 1000 500 1600
pipe wall thickness
min. mm 7 4 11
max. mm 15 9 23
material
housing PPSU withwith
stainless steel
cap304
(1.4301)
PPSU with
stainless steel
cap304
(1.4301)
PPSU with
stainless steel
cap304
(1.4301)
contact surface PPSU PPSU PPSU
degree of protection
according to EN 60529
IP 65 IP 65 IP 65
transducer cable
type 2549 2549 2549
length m 5 5 5
dimensions
length l mm 128.5 128.5 128.5
width b mm505050
height h mm 67.5 67.5 67.5
dimensional drawing
operating temperature
min. °C -40 -40 -40
max. °C +170 +170 +170
continued on next page