Flexim FLUXUS G704 - INSTALL MATERIAL

UMG70XV3-4EN 12.01.2009 225
B Menu Structure
start of the measured values transmission
This display will be indicated only if measured
values are stored in the data memory and the
flowmeter is connected with the PC by a seri-
al cable.
display of the data transmission progress
DELETE MEAS.VAL.
selection of the displays for deleting of stored
measured values
confirmation for deleting of measured values
This display will be indicated only if measured
values are stored in the data memory.
INSTALL MATERIAL
selection of the displays for the input of pipe
and lining materials
INSTALL MATERIAL with SPECIAL FUNCTION\SYSTEM SET-
TINGS\LIBRARIES\EXTENDED LIBRARY = OFF
selection whether a user defined material is
to be edited or deleted
selection of a user defined material
input of a designation for the selected materi-
al
cold start
resistant
Send HEADER 01
................

................
Special Function
Delete Meas.Val.
Really Delete
no >YES<
Special Function
Install Material
Install Material
>EDIT< delete
USER Material 
#01:--not used--
EDIT TEXT (
USER MATERIAL 1