Flexim FLUXUS G704 - Page 229

UMG70XV3-4EN 12.01.2009 229
B Menu Structure
input of the gas compressibility factor
confirmation that the changes are to be
stored
This display is indicated only if a new medium
has been entered or the properties of an ex-
isting medium have been changed.
After input of HotCode 071001
input of the lower limit of the inner pipe diam-
eter for the displayed transducer type
range: 3...63 mm
x
cold start
resistant
GASFACTOR
0.0
Save changes
no >YES<
DNmin Q-Sensor
15 mm