234 UMG70XV3-4EN 12.01.2009
C Reference
Table C.5: Chemical Resistance of Autotex
Autotex (keyboard) is resistant according to DIN 42115, part 2 against the following
chemicals for a contact time of more than 24 h without visible modification:
Autotex is resistant according to DIN 42115, part 2 to acetic acid for a contact time <1 h
without visible damage.
Autotex is not resistant to following chemicals:
• ethanol • nitric acid <10 %
• cyclohexanol • trichloroacetic acid <50 %
• diacetone alcohol • sulphuric acid <10 %
• glycol • drilling emulsion
• isopropanol • diesel oil
• glycerine • varnish
• methanol • paraffin oil
• triacetin • castor oil
• Dowandol DRM/PM • silicone oil
• acetone • turpentine oil substitute
• methyl-ethyl-ketone • Dccon
• Dioxan • plane fuel
• cyclohexanone • gasoline
• MIBK • Water
• isophorone • saltwater
• ammonia <40 % • 1,1,1-trichlorethane
• soda lye <40 % • ethyl acetate
• potassium hydroxide < 30 % • diethyl ether
• alcalicarbonate • N-butyl acetate
• bichromate • amyl acetate
• potassium hexacyanoferrates • butylcellosolve
• acetonitrile • ether
• sodium bisulfate • chlornatron <20 %
• formaldehyde 37…42 % • hydrogen peroxide <25 %
• acetaldehyde • potash soft soap
• aliphatic hydrocarbons • detergent
• Toluol • tensides
• Xylol • softener
• diluent (white spirit) • iron chloride (FeCl
2
)
• formic acid <50 % • iron chloride (FeCl
3
)
• acetic acid <50 % • dibutyl phthalate
• phosphoric acid <30 % • dioctyl phthalate
• hydrochloric acid <36 % • sodium carbonate
• concentrated mineral acids • benzyl alcohol
• concentrated alkaline solutions • methylene chloride
• high pressure steam >100 °C