Flintec FT-111 - Page 67

FT-111, User Manual Rev. 2.0.0, June 2022 Page 67 of 137
When you access this parameter via web service, the "Backup setting"
button on the web service screen becomes visible to back up the
instrument
[
964
WEB RESTORE
]
Restores the instrument from the PC via web service.
When you access this parameter via web service, the "Restore" button
on the web service screen becomes visible to restore the instrument.
[
97-
FIRMWARE
]
FIRMWARE INFORMATION
Press key or key again to enter this menu.
Or press key to go to the next sub-block.
[
971
INSTRUMENT
]
XX.XX
[
972
OPTION
]
XX.XX
[
973
UPGRADE
]
M
Firmware upgrade
Call Flintec service or dealer to upgrade.
[
99-
DEFAULT
]
DEFAULTS LOADING
Press key or key again to enter this menu.
Press key to go to the beginning of the sub-block or press
key to go to beginning of the main-block.
[
993
PARAMET DEF
]
M
Load parameter's default
(Calibration do not change)
[
994
FACTORY DEF
]
M
Load factory defaults