Versiv Series Cabling Certification Product Family
Users Manual
134
Type A USB port: This USB host port lets you save test results
on a USB flash drive and connect the FiberInspector Pro video
probe to the tester. On a Versiv main tester, this port lets you
or connect a Wi-Fi adapter for access to the Fluke Networks
cloud service LinkWare Live. (Versiv 2 testers have an internal
Wi-Fi radio.)
Headset jack
: Starts a test. To start a test, you can also tap TEST on
the display.
: Power button. Versiv 2: The LED in the power button
shows the status of the battery charging process. See Table 2
on page 15.
: Press to go to the home screen.
Connector for the AC adapter. Versiv: The LED is red when the
battery charges, and green when the battery is fully charged.
The LED is yellow if the battery will not charge. See “Charge
the Battery” on page 14.
RJ45 connector: Lets you connect to a network for access to
Fluke Networks cloud services.
See Figure 53:
Decal with laser
safety information.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
