FMC Technologies Proline Promass 83 E - Function Description

Issue/Rev. 0.2 (12/12)
Page 146 • MN0M023
10 Block SPECIAL FUNCTION Device Functions Proline Promass 83
COEFFICIENT A2
(7034)
Coefficient A2 entry.
User input:
5-digit floating-point number
Factory setting:
0
COEFFICIENT A3
(7035)
Coefficient A3 entry.
User input:
5-digit floating-point number
Factory setting:
0
COEFFICIENT A4
(7036)
Coefficient A4 entry.
User input:
5-digit floating-point number
Factory setting:
0
COEFFICIENT B1
(7037)
! Note!
This function does only appear if the option % MASS 3D, % VOLUME 3D or OTHERS 3D
was selected in the function MODE (7021).
Coefficient B1 entry.
User input:
5-digit floating-point number
Factory setting:
0
COEFFICIENT B2
(7038)
! Note!
This function does only appear if the option % MASS 3D, % VOLUME 3D or OTHERS 3D
was selected in the function MODE (7021).
Coefficient B2 entry.
User input:
5-digit floating-point number
Factory setting:
0
COEFFICIENT B3
(7039)
! Note!
This function does only appear if the option % MASS 3D, % VOLUME 3D or OTHERS 3D
was selected in the function MODE (7021).
Coefficient B3 entry.
User input:
5-digit floating-point number
Factory setting:
0
Function description
SPECIAL FUNCTION o DENSITY FUNCTIONS o CONFIGURATION