FMC Technologies Proline Promass 83 E - Function Description

Issue/Rev. 0.2 (12/12) MN0M023 • Page 165
Device Functions Proline Promass 83 10 Block SPECIAL FUNCTION
BATCHING TIME
(7283)
In this function, you can read the batching time for the current or completed batching
process, i.e. starting at 0 seconds, the time displayed increases until the batching process
is complete.
Application:
This BATCHING TIME refers to the batch quantity determined in the BATCH SUM
function for the current or last batching process.
A0001170-en
Display:
max. 7-digit floating-point number
! Note!
• Behavior when controlling batching process via function BATCH PROCEDURE:
–STOP  BATCHING TIME is not reset and stays at the current value.
– START  BATCHING TIME is reset and starts with the value 0
–HOLD  BATCHING TIME is not reset and stays at the current value.
– GO ON  BATCHING TIME is not reset and continues updating on the basis of
the last time value
• The BATCHING TIME is also updated during the batching process
Function description
SPECIAL FUNCTION o BATCHING FUNCTION o INFORMATION
100
0
Batch 1
Batch 2
100
0
t (s)
Batch time
Batch time
Batch sum