FMC Technologies Proline Promass 83 E - Group MAIN LINE; Function Group CONFIGURATION

Issue/Rev. 0.2 (12/12)
Page 40 • MN0M023
5 Block USER INTERFACE Device Functions Proline Promass 83
A0001253
1 = main line, 2 = additional line, 3 = information line
ASSIGN
(2200)
In this function, a value to be displayed is assigned to the main line (top line in the local
display). This value is displayed during normal operation.
Options (standard):
OFF
MASS FLOW
MASS FLOW IN %
VOLUME FLOW
VOLUME FLOW IN %
CORRECTED VOLUME FLOW
CORRECTED VOLUME FLOW IN %
DENSITY
REFERENCE DENSITY
TEMPERATURE
ACTUAL CURRENT (1...3)
ACTUAL FREQUENCY (1...2)
TOTALIZER (1...3)
ACTUAL CURRENT INPUT
Factory setting:
MASS FLOW
Advanced options with optional software package BATCHING:
BATCH NAME (“BATCH # 1” or “BEER 330”, etc.)
BATCH QUANTITY (overall quantity to be batched)
BATCH COUNTER (batching processes carried out)
BATCH SUM (effective total batching quantity)
! Note!
The options given in the BATCHING software package always refer to the batching
selected (“BATCH # 1”, “BATCH # 2”, etc.) in the BATCH SELECTOR function
(page 147). Example: If BATCH # 1 was selected in the BATCH SELECTOR function
(7200), then only the values from BATCH # 1 (batch name, batch quantity etc.) can be
displayed.
(continued on next page)
5.2 Group MAIN LINE
5.2.1 Function group CONFIGURATION
USER INTERFACE C

CONTROL CAA

MAIN LINE CCA

CONFIGURATION 220
Function description
USER INTERFACE o MAIN LINE o CONFIGURATION
Esc
E
+
-
1
2
3