FMC Technologies Proline Promass 83 E - Group INFORMATION LINE; Function Group CONFIGURATION

Issue/Rev. 0.2 (12/12)
Page 50 • MN0M023
5 Block USER INTERFACE Device Functions Proline Promass 83
5.4 Group INFORMATION LINE
5.4.1 Function group CONFIGURATION
USER INTERFACE C

CONTROL CAA

MAIN LINE CCA

ADDITIONAL LINE CEA

INFORMATION LINE CGA

CONFIGURATION 260
Function description
USER INTERFACE o INFORMATION LINE o CONFIGURATION
A0001253
1 = main line, 2 = additional line, 3 = information line
ASSIGN
(2600)
In this function, a value to be displayed is assigned to the information line (bottom line in
the local display). This value is displayed during normal operation.
Options:
OFF
MASS FLOW
MASS FLOW IN %
VOLUME FLOW
VOLUME FLOW IN %
CORRECTED VOLUME FLOW
CORRECTED VOLUME FLOW IN %
DENSITY
REFERENCE DENSITY
TEMPERATURE
MASS FLOW BARGRAPH IN %
VOLUME FLOW BARGRAPH IN %
CORRECTED VOLUME FLOW BARGRAPH IN %
ACTUAL CURRENT (1...3)
ACTUAL FREQUENCY (1...2)
TOTALIZER (1...3)
TAG NAME
OPERATING/SYSTEM CONDITIONS
FLOW DIRECTION READING
ACTUAL CURRENT INPUT
Factory setting:
OPERATING/SYSTEM CONDITIONS
Esc
E
+
-
1
2
3
(continued on next page)