FMC Technologies Proline Promass 83 E - Function Description

Issue/Rev. 0.2 (12/12) MN0M023 • Page 163
Device Functions Proline Promass 83 10 Block SPECIAL FUNCTION
BATCH DOWNWARDS
(7262)
In this function the batching progress can be read downwards, i.e. starting from the
batching quantity, the quantity displayed decreases until the batching process is
complete.
Display:
Floating-point number incl. unit
! Note!
The value of this function can be output via the current output.
BATCH COUNTER
(7263)
Use this function to display the number of batchings carried out.
Display:
max. 7-digit floating-point number
Factory setting:
0
! Note!
• The batching quantity totalizer can be reset to 0 via the function RESET
SUM/COUNTER (7265).
• This function is reset to 0 (zero) if a different batching specification is selected in the
function BATCH SELECTOR (7200).
BATCH SUM
(7264)
Use this function to display the effective overall total of all the batchings carried out.
Display:
max. 7-digit floating-point number [unit]
Factory setting:
0 [unit]
! Note!
• E.g. in 2-stage batching the effective overall total is calculated from the coarse batching
quantity, fine batching quantity and after run quantity.
• The total batching quantity can be reset to 0 via the function RESET SUM/COUNTER
(7265).
• This function is reset to 0 (zero) if a different batching specification is selected in the
function BATCH SELECTOR (7200).
RESET SUM/COUNTER
(7265)
Use this function to reset the batch counter and the batch sum to zero.
User input:
NO
YES
Factory setting:
NO
! Note!
The batch counter and the batch sum can also be reset via the batching menu
(information line on the local display).
Function description
SPECIAL FUNCTION o BATCHING FUNCTION o OPERATION