FMC Technologies Proline Promass 83 E - Function Group MULTIPLEX

Issue/Rev. 0.2 (12/12) MN0M023 • Page 53
Device Functions Proline Promass 83 5 Block USER INTERFACE
5.4.2 Function group MULTIPLEX
USER INTERFACE C

CONTROL CAA

MAIN LINE CCA

ADDITIONAL LINE CEA

INFORMATION LINE CGA

CONFIGURATION 260

MULTIPLEX 262
Function description
USER INTERFACE o INFORMATION LINE o MULTIPLEX
! Note!
If you select the BATCHING OPERATING KEYS in the function ASSIGN (2600), the multiplex display functionality is
not available in the information line.
ASSIGN
(2620)
Use this function to define the second reading to be displayed in the information line
alternately (every 10 seconds) with the value defined in the function ASSIGN (2600).
Options:
OFF
MASS FLOW
MASS FLOW IN %
VOLUME FLOW
VOLUME FLOW IN %
CORRECTED VOLUME FLOW
CORRECTED VOLUME FLOW IN %
DENSITY
REFERENCE DENSITY
TEMPERATURE
MASS FLOW BARGRAPH IN %
VOLUME FLOW BARGRAPH IN %
CORRECTED VOLUME FLOW BARGRAPH IN %
ACTUAL CURRENT (1...3)
ACTUAL FREQUENCY (1...2)
TOTALIZER (1...3)
TAG NAME
OPERATING/SYSTEM CONDITIONS
DISPLAY FLOW DIRECTION
ACTUAL CURRENT INPUT
Factory setting:
OFF
(continued on next page)