FMC Technologies Proline Promass 83 E - Function Description

Issue/Rev. 0.2 (12/12)
Page 16 • MN0M023
3 Block MEASURED VARIABLES Device Functions Proline Promass 83
°PLATO
(0034)
! Note!
This function is not available unless °PLATO was selected in the DENSITY FUNCTION
function (7000), (see page 141).
The concentration in °PLATO is displayed.
Display:
5-digit floating-point number, incl. units
°BALLING
(0035)
! Note!
This function is not available unless °BALLING was selected in the DENSITY FUNCTION
function (7000), (see page 141).
The concentration in °BALLING is displayed.
Display:
5-digit floating-point number, incl. units
°BRIX
(0036)
! Note!
This function is not available unless °BRIX was selected in the DENSITY FUNCTION
function (7000), (see page 141).
The concentration in °BRIX is displayed.
Display:
5-digit floating-point number, incl. units
OTHERS
(0037)
! Note!
This function is not available unless FLEXIBLE was selected in the DENSITY FUNCTION
function (7000), (see page 141) and this function is not available unless OTHERS 2D or
OTHERS 3D was selected in the MODE function (7010), (see page 144).
Displays the concentration in the unit, which was defined in the function TEXT
ARBITRARY CONCENTRATION (0606), (see page 24).
Display:
5-digit floating-point number, incl. units
Function description
MEASURED VARIABLES o MEASURING VALUES o ADDITIONAL VALUES