FMC Technologies Proline Promass 83 E - 4 Block QUICK SETUP

Issue/Rev. 0.2 (12/12) MN0M023 • Page 25
Device Functions Proline Promass 83 4 Block QUICK SETUP
4 Block QUICK SETUP
Block Group
Function
groups
Functions
QUICK SETUP
(B)

QUICK SETUP
COMMISSION
(1002) p. 25

QUICK SETUP
PULS.FLOW
(1003) p. 25
QUICK SETUP
GAS MEASUR.
(1004) p. 25
QUICK SETUP
BATCH/DOSING
(1005) p. 26
T-DAT
SAVE/LOAD
(1009) p. 26
Function description
QUICK SETUP
QUICK SETUP
COMMISSIONING
(1002)
Use this function to start the Setup menu for commissioning.
Options:
YES
NO
Factory setting:
NO
! Note!
You will find a flowchart of the COMMISSIONING setup menu on page 27. For more
information on Setup menus, please refer to the Operating Instructions
Proline Promass 83, BA 059D/06/en.
QUICK SETUP
PULSATING FLOW
(1003)
Use this function to start the application-specific Setup menu for pulsating flow.
Options:
YES
NO
Factory setting:
NO
! Note!
You will find a flowchart of the PULSATING FLOW setup menu on page 29. For more
information on Setup menus, please refer to the Operating Instructions
Proline Promass 83, BA 059D/06/en.
QUICK SETUP GAS
MEASUR.
(1004)
Use this function to start the application specific Setup menu for the gas measurement.
Options:
YES
NO
Factory setting:
NO
! Note!
You will find a flowchart of the GAS MEASUREMENT setup menu on page 31. For more
information on Setup menus, please refer to the Operating Instructions
Proline Promass 83, BA 059D/06/en.