Fortinet FortiGate Series Administration Guide

Dynamic routing for IPv6 traffic What’s new in FortiOS Version 4.0 MR1
FortiGate Version 4.0 MR1 Administration Guide
54 01-410-89802-20090903
http://docs.fortinet.com/ • Feedback
stub-type
{no-summary | summary}
Enter no-summary to prevent an ABR sending
summary LSAs into a stub area. Enter summary
to allow an ABR to send summary LSAs into a
stub area.
summary
type
{regular | stub}
Set the area type:
• Select regular for a normal OSPF area.
• Select stub for a stub area.
regular
config range Variables
edit <range_id> Enter an ID number for the range. The number
must be an integer in the 0 to 4 294 967 295
range.
No default.
advertise
{enable | disable}
Enable or disable advertising the specified
range.
enable
prefix6
<address_ipv6mask>
Specify the range of addresses to summarize. ::/0
config virtual-link Variables
edit <vlink_name> Enter a name for the virtual link. No default.
dead-interval
<seconds_integer>
The time, in seconds, to wait for a hello packet
before declaring a router down. The value of the
dead-interval should be four times the value
of the hello-interval.
Both ends of the virtual link must use the same
value for dead-interval.
The valid range for seconds_integer is 1 to
65535.
40
hello-interval
<seconds_integer>
The time, in seconds, between hello packets.
Both ends of the virtual link must use the same
value for hello-interval.
The valid range for seconds_integer is 1 to
65535.
10
peer <address_ipv4> The router id of the remote ABR.
0.0.0.0 is not allowed.
0.0.0.0
retransmit-interval
<seconds_integer>
The time, in seconds, to wait before sending a
LSA retransmission. The value for the retransmit
interval must be greater than the expected
round-trip delay for a packet. The valid range for
seconds_integer is 1 to 65535.
5
transmit-delay
<seconds_integer>
The estimated time, in seconds, required to
send a link state update packet on this virtual
link.
OSPF increments the age of the LSAs in the
update packet to account for transmission and
propagation delays on the virtual link.
Increase the value for transmit-delay on low
speed links.
The valid range for seconds_integer is 1 to
65535.
1
Variable Description Default

Fortinet FortiGate Series Specifications

General

Model	FortiGate Series
Category	Firewall
Throughput	Varies by model
Interfaces	Varies by model
Concurrent Sessions	Varies by model
VPN Support	Yes
High Availability	Yes
Firewall Throughput	Varies by model
VPN Throughput	Varies by model
IPS Throughput	Varies by model
NGFW Throughput	Varies by model
Threat Protection Throughput	Varies by model
New Sessions per Second	Varies by model
Power Supply	Varies by model
Security Features	Firewall, IPS, Application Control, Web Filtering, Antivirus, VPN
Virtual Domains	Yes
Form Factor	Desktop, Rackmount