Fortinet Technologies Inc. Page 117 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
3. Click Create.
Modifying caller IDs
You can change the phone number, caller’s name, or both that will appear on the destination
phone.
Caller ID modifications are used when configuring dial plans. For more information, see
“Configuring Call Routing” on page 186.
To modify a caller ID
1. Go to Phone System > Profiles > Caller ID Modification.
2. Click New and configure the following:
Transport Encryption: Select TLS to encrypt the system connection between
an extension and the FortiVoice unit. Select TLS and SRTP to
encrypt both the system connection and voice communication
between an extension and the FortiVoice unit.
This option only applies to FortiFone x60 series with firmware version
of 1.2.0.4 or later.
To make this option work, you need to select a SIP profile with TLS
or TLS and SRTP selected for Encryption when configuring an
extension. You also need to enable TLS on the FortiVoice unit by
going to Phone System > Advanced Settings > SIP.
Transport: SIP commonly uses TCP or UDP port 5060 and/or 5061.
Port 5060 is used for non-encrypted SIP signaling sessions and port
5061 is typically used for SIP sessions encrypted with Transport
Layer Security (TLS).
Enable the protocols as required.
This option, if applied to a user, overrides the system-wide transport
settings. For more information, see “Configuring SIP settings” on
page 106.
Secure RTP: Select to provide encryption, message authentication
and integrity, and replay protection to the FortiVoice Real-time
Transport Protocol data.
Codec Select the codecs supported by the VoIP service provider. Among
the selected ones, choose the preferred one for the VoIP provider.
The preferred codec is usually the most used one in your area and
provides the best quality of communication.
If your preferred codec is different from that of your VoIP service
provider, the service provider’s codec will be used as long as it is one
of your supported codecs.
GUI field Description
Name Enter the name for this caller ID modification record.
Match number Enter the extension number or number pattern you want to modify.
For example, you can enter 8134 to modify a single extension, or
81xx to modify all the four-digit numbers starting with 81.
To Next Page
Loading...
