Fortinet Technologies Inc. Page 172 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
4. Click Create.
Testing SIP trunks
After you create a SIP trunk, you can select the trunk and click Test to see if the trunk works.
For more information, see “Test” on page 167.
To test a SIP trunk
1. Go to Trunks > VoIP > SIP.
2. Select the trunk that you want to test and click Test.
The System Configuration Test page appears.
3. Configure the following:
Figure 57: Testing SIP trunk
Forward fax to DID
mapping extension
Some extensions have DID mappings. See “Mapping DIDs”
on page 191. When an incoming fax reaches an extension
with DID mapping, selecting this option will send the fax to the
DID mapping extension.
This option is only selectable if Automatic fax detection is
selected.
eFax account Select the fax receiving account for the detected faxes. This
does not include the faxes sent to DID mapping extensions if
you selected Forward fax to DID mapping extension.
Phone Number Click New to add the phone number provided by your VoIP
service provider. The VoIP service provider SIP server will
direct calls from external callers directly to this number. You
can add multiple numbers.
GUI field Description
Test Dry Run Run a system SIP trunk test without making a real phone call.
Destination number Enter a destination number to call.
To Next Page
Loading...
