Fortinet FortiVoice - Testing Outbound Dial Plans

Fortinet Technologies Inc. Page 195 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
4. Click Create.
Testing outbound dial plans
After you create a dial plan, you can select the dial plan and click Test to see if the dial plan
works.
For more information, see “Test” on page 193.
To test an outbound dial plan
1. Go to Call Routing > Outbound > Outbound.
2. Select the dial plan that you want to test and click Test.
The call test page appears.
3. Configure the following:
Figure 73: Testing dial plans
Caller ID Match Click New to set the caller ID pattern following “Pattern-matching
syntax” on page 196 and “Pattern-matching examples” on page 196
for this dial plan, and click Create.
You can enter a caller’s display name string or the caller’s phone
number string as the pattern.
Callers with IDs under this pattern are subject to this plan.
Call Handling Click New to configure the call handling action for the numbers
matching the configured number pattern and the caller IDs matching
the caller ID pattern. For details, see “Configuring call handling
actions” on page 198.
GUI field Description
Test Call - Dry Run Run a system outbound dial plan test without making a real
phone call.
Destination number Enter a destination number to call.
From number Enter the number from which you want to call the destination
number. The FortiVoice unit will connect this number with the
destination number for the test.