Fortinet Technologies Inc. Page 46 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
2. Either click New to add a route or double-click a route to modify it.
A dialog appears.
3. In Destination IP/netmask, enter the destination IP address and netmask of packets that will
be subject to this static route.
To create a default route that will match all packets, enter 0.0.0.0/0.0.0.0.
4. Select the interface that this route applies to.
5. In Gateway, type the IP address of the next-hop router to which the FortiVoice unit will
forward packets subject to this static route. This router must know how to route packets to
the destination IP addresses that you have specified in Destination IP/netmask. For an
Internet connection, the next hop routing gateway routes traffic to the Internet.
6. Click Create or OK.
Configuring DNS
FortiVoice units require DNS servers for features such as reverse DNS lookups. Your ISP may
supply IP addresses of DNS servers, or you may want to use the IP addresses of your own DNS
servers.
The DNS tab lets you configure the DNS servers that the FortiVoice unit queries to resolve
domain names into IP addresses.
To configure the primary and secondary DNS servers
1. Go to System > Network > DNS.
2. In Primary DNS server, enter the IP address of the primary DNS server.
3. In Secondary DNS server, enter the IP address of the secondary DNS server.
4. Click Apply.
Configuring DHCP server
A DHCP server provides an address to a client on the network, when requested, from a defined
address range.
You can configure one or more DHCP servers on any FortiVoice interface. A DHCP server
dynamically assigns IP addresses to the clients on the network connected to the interface.
These clients must be configured to obtain their IP addresses using DHCP.
To configure the DHCP server
1. Go to System > Network > DHCP.
2. Click New and configure the following:
Gateway Displays the IP address of the next-hop router to which packets
subject to the static route will be forwarded.
For improved FortiVoice unit performance, use DNS servers on your local network.
To Next Page
Loading...
