Fortinet FortiVoice - Setting the Recorded File Format

Fortinet Technologies Inc. Page 219 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
3. Click Create.
Setting the recorded file format
Select the format for recording calls.
Name Enter a name for this configuration.
Enabled Select to activate this configuration.
Type Select the category of calls you want to record: by phone
number, department, group, or trunk.
If you select By phone number for Type, configure the following:
Caller number
pattern
Enter the number pattern to match the callers’ phone numbers
following the pattern:
^[0-9XNZ]*[^\.]*$
where X=(0-9), Z=(1-9), and N=(2-9).
For more information, see “Configuring PBX options” on
page 99.
The phone calls from the numbers matching the pattern will be
recorded.
Dialed number
pattern
Enter the number pattern to match the dialed phone numbers
following the pattern:
^[^_][0-9XNZ\.]*$
where X=(0-9), Z=(1-9), and N=(2-9).
For more information, see “Configuring PBX options” on
page 99.
The phone calls to the numbers matching the pattern will be
recorded.
If you select By department for Type, configure the following:
Department Select the extension department of which you want to record the
calls. You can add a new department or modify an existing one.
For more information, see “Creating extension departments” on
page 157.
If you select By group for Type, configure the following:
Group Select the user group of which you want to record the calls. You
can add a new group or modify an existing one. For more
information, see “Creating user groups” on page 156.
If you select By trunk for Type, configure the following:
Trunk Select the trunk of which you want to record the calls. You can
add a new trunk or modify an existing one. For more information,
see “Configuring Trunks” on page 167.
Direction Select the direction of which you want to record the calls.